2010年2月23日，卫生部出台《关于公立医院改革试
编辑： admin 2017-03-03
-
4
其实只要明白主要矛盾和矛盾的主要方面的区别就好了
主要矛盾是指在复杂事物中包含多个矛盾,其地位和作用是不平衡的,其中必有一个矛盾居于支配地位,对事物的发展起着决定作用,这个矛盾就是主要矛盾.
矛盾的主要方面是指在一个矛盾的两个方面中,其地位和作用不平衡,其中居于支配地位,对事物的发展起主导作用的矛盾方面叫做矛盾的主要方面.
而题目中说的不是一个矛盾的两个方面 故应选C
类似问题
类似问题1：如图,开关都闭合后电压表的示数为4.5V,电流表A1和A2的示数分别是0.5A和0.2A 下面是图,看在我辛辛苦苦花了这么多时间画图的份上,大神们也回个图给我吧!不求好看,看得懂就行了.[物理科目]
接线图如下图所示：
类似问题2：2012-06-16 18:37:00,神州九号飞船在酒泉飞行发射中心发射升空,18时55分,根据北京实时轨道监视判断,神舟九号进入近地点200公里,远地330公里的近地轨道,今入预定轨道内.神州九号飞船距离地球的[数学科目]
近地点200公里,远地330公里的近地轨道
所以200≤x≤330
类似问题3：在兴安“乐满地主题乐园”里有个极刺激的游乐项目：蹦极.游乐者系上弹性牵索从高处跳下,利用牵索产生的弹力作用使自己在空中几番升降后静止.那么游乐者在其中的下降过程中 [ ] A．重[物理科目]
正确答案 A
游乐者在其中的下降过程中 h减小 重力势能EP=mgh 一直减小 A正确 C错
人经历速度先增大后减小,动能先增大后减小,B错
利用牵索产生的弹力作用使自己在空中几番升降后静止.空气阻力做负功,系统机械能减小D错
类似问题4：(3)A chemical company is expanding its operations,and a disused woollen mill is to be converted into a processing plant.Four companies have submitted designs for the equipment that will be installed in the mill,and a choice has to be made between the[英语科目]
(3)A chemical company is expanding its operations,and a disused woollen mill is to be converted into a processing plant.Four companies have submitted designs for the equipment that will be installed in the mill,and a choice has to be made between them.The manager of the chemical company has identified three attributes that he considers to be important in the decision:‘cost’,‘environmental impact’ and ‘reliability’.He has assessed how well each design performs on each attribute by allocating values on a scale from 0 (the worst design) to 100 (the best).These values are shown below,together with the costs that will be incurred if a design is chosen:
一家化学公司正在扩大其业务,并将一个废弃的毛纺厂是将被转换成一个加工厂.四家公司提出了将会安装在磨机,该设备的设计,两者之间作出选择.化工公司的经理确定了他认为重要的是在决定中的三个属性：'成本'、 '环境影响' 和 '可靠性'.他评估如何好每个设计通过对执行的每个属性分配分摊比额表上的值从 0 （最糟糕的设计） 到 100 （最佳）.这些值如下所示,以及如果选择一种设计则会招致的费用：
Benefits
Dsign涉及 cost($) 成本 Environmental impact 环境影响 Reliability可靠性
A 90,000 20 100
B 110,000 70 0
C 170,000 100 90
D 60,000 0 50
a) The manager is having difficulty in allocating weights to the two benefit attributes.Assuming that the two weights sum to 100 and that mutual preference independence exists between the attributes,perform a sensitivity analysis to show how the design offering the highest value for aggregate benefits will vary depending upon the weight that has been allocated to ‘environmental impact’.
(a) 经理难以权重两个效益分配属性.假设这两个重量的总和为 100 和那相互偏好独立存在属性之间,执行灵敏度分析,以显示如何设计提供聚合的好处的最高值将会发生变化取决于已分配给 '环境影响' 的比重.
(b) Eventually,the manager decides to allocate ‘environmental impact’ a weight of 30 and ‘reliability’ a weight of 70.By plotting the benefits and costs of the designs on a graph,identify the designs that lie on the efficient frontier.
(b) 最终,经理决定分配3成 '可靠性' 比重和 7成的 '环境影响'比重.通过绘制的效益和成本的关系上图设计,识别出适合效率靠前设计.
(c) The manager also decides that,if he were offered a hypothetical design that had the lowest reliability and the worst environmental impact,he would be prepared to pay $120 000 to convert that design to one that had the best impact on the environment but that still had the lowest level of reliability.Which design should the manager choose?
(c) 经理又决定,是否他被提供了最低的可靠性和对环境的影响最坏的假设性设计,他需要支付 120 000 美元将转换该设计为一个对环境产生最佳的影响,但这仍有是最低级别的可靠性.经理应该选择哪些设计?
如果是我,将选择C,该答案符合‘cost’,‘environmental impact’ and ‘reliability’的要求和期望.
类似问题5：求解第4题,
